Search Results
Posted by admin on December 18, 2009
Haynes Publishing Sparkford, Yeovil, Somerset BA22 7JJ, UK. Tel: +44 (0)1963 440635 Fax: +44 (0)1963 440001 • E-mail: sales@haynes.co.uk www.haynes.co.uk Haynes Publishing is a … … trading style of J H Haynes & Co Ltd. Registered in England, Number: 1449587 Registered Office: Sparkford, Yeovil, Somerset BA22 7JJ Press Release from Haynes Publishing For Immediate Release: Beat the petrol price rises with Haynes’ top 10 ways to cheaper motoring Prices at the pumps rose again this month – petrol by as much as 1.7p per …
(more…)
Posted in Automotive ebooks | 
1 Comment »
Posted by admin on December 8, 2009
1. Strengthening Advanced Environmental Technologies 2. Advancement of Motorcycle Business 3. Advancement of Automobile Business 3 500,000 units Annual global sales target (beyond 2010) Civic Hybrid 2nd Generation 2005 2009 2010 3rd Generation Insight CR-Z FIT/Jazz Hybrid Hybrid models? Honda recognizes hybrid technologies as the most realistic path for CO2 reduction at this time a lightweight and compact (more…)
Posted in Honda | No Comments »
Posted by admin on November 20, 2009
EXPLANATION OF NEW FEATURES On carbureted models (M2) , with the new ignition module and addition of the engine temperature sensor, the ignition module is now able to sense when overheating is about to occur and it will automatically reduce power until the operating temperature returns to normal. The rider may experience this condition during extended high speed operation with high ambient (more…)
Posted in Buell | No Comments »
Posted by admin on November 20, 2009
Buell® Family oF motorcycles 1125r™/1125cr™ FireBolt® Utilizing the 146 horsepower, liquid-cooled, Helicon™ V-Twin engine and Buell’s Intuitive Response Chassis, the Buell 1125R and 1125CR deliver precise handling and massive power for superbike and street customers who demand high performance. Firebolt XB12R A unique balance of racetrack and real-world performance dedicated to providing the ultimate (more…)
Posted in Buell | No Comments »
Posted by admin on August 20, 2009
GENERAL Buell Motorcycle Company has learned that certain Buell Pro Series Race Systems contain a muffler that could break. This condition could allow the muffler to drag on the ground, which may adversely affect handling and could cause an accident. Accordingly, Buell Motorcycle Company is voluntarily conducting a recall campaign to formally recall all potentially affected mufflers. This condition will be remedied by installing the race muffler retention recall kit on all potentially affected vehicles. VEHICLES INVOLVED This campaign involves all domestic and international model Buell motorcycles equipped with Buell Pro Race System mufflers (Part No. 65398-96Y and S2110.GA) which are contained in the following kits: Part No. 65398-96YA Part No. 91424-99Y Part No. 82000-96Y Part No. 82000-99Y Part No. 82001-99Y Part No. 82002-99Y For instructions on handling existing inventory, see CREDIT PROCEDURES – DEALER STOCK PARTS. DEALER ACTION DO NOT SELL ANY RACE MUFFLER KITS YOU MAY HAVE IN STOCK. Furthermore, if any of these race muffler kits were installed by you or your customers, please advise the customer to schedule and have the recall service performed as soon as possible. Because Buell Distribution Corporation has no record of who may have purchased/received these kits at the retail level, it is your responsibility to notify each of your customers. Buell Distribution Corporation will send you a sufficient supply of owner notification letters to assist you with the notification process. Since the recall involves parts and not a vehicle on record, your SPOC representative and/or the Recall Information Line, TALON and hd-net.com will NOT be able to assist you. Recall kits will be available on or before October 31, 2000 and must be ordered . There will be no wave shipments. All kits will be shipped no charge, transportation paid. To order kits, please fill out the attached order form and send/fax it to the Warranty Department at (FAX) 414-343-8346. The Race Muffler Retention Recall Kit (Part Number 94002Y) consists of: Retention Cable Clamp (2) Washers Socket Head Screw, 1/4-20 x 2 in. Hex Nut, 1/4-20 Rivet, Stainless Steel INSTALLATION IMPORTANT NOTE The kit installs with muffler left in place. Do NOT remove the muffler to install the retention kit. 1. Secure motorcycle on a suitable lift. 1WARNING To protect against shock and accidental start-up of vehicle, disconnect the negative battery cable before proceeding. Inadequate safety precautions could result in death or serious injury. 2. Disconnect negative battery cable from battery terminal. 3. See Figure 1. Using a Scotch-Brite pad, thoroughly clean front portion of muffler where clamp will be installed. 4. Inspect muffler for cracks or damage at inlet. If muffler is cracked or damaged, STOP! Contact XL/Buell Technical Service at telephone (414) 343-4887. You will be given a unique credit procedure, instructions and appropriate parts will be expedited to you, or available for you to order. 5. See Figure 2. Remove front allen screw on left lower side of the primary cover. Install retention cable eyelet with front allen screw finger tight. NOTE: On X1 models or models equipped with chin fairings, remove spacer between chin fairing and primary cover. 6. See Figure 2. Position new clamp on front of muffler so clamp hardware will be located on outboard side. 7. See Figure 1. Install new socket head screw and washer from bottom through unthreaded clamp half. Position retention cable wire loop between two clamp halves and finish installing socket head screw through wire loop and the threaded clamp half. NOTE: When properly installed, there should be no tension on the cable. 8. See Figure 1. Tighten clamp screw to 10-12 ft-lbs (14-16 Nm)…
Download RECALL CAMPAIGN 0821 – RACE MUFFLER RETENTION KIT.Pdf
Posted in Buell | No Comments »
Posted by admin on August 9, 2009
Motorcycle/ATVs 2007 BUELL Road/Street XB12R FIREBOLT Model: XB12R FIREBOLT Piston Displacement (CCs): 1203 Stroke: 4 Cylinders: 2 Speeds: 5 Dry Weight: 395 Low Retail Average Retail Base Price $5,580 $6,975 Options Exhaust-High Performance (Street) $280 $317 Oil Cooler $80 $89 TOTAL PRICE $5,940 $7,381 Suggested List: $10,495 Back to Top Value Explanations Prices shown are retail consumer values and to be considered as selling prices. Trade-in (more…)
Posted in Buell | No Comments »
Posted by admin on August 5, 2009
Sportster/Buell Installation The HSR series carburetors are precise yet durable instruments; however, like any other piece of fine equipment, they require correct installation and reasonable care to assure optimum performance and long life. Extra time spent during installation will pay off in both short and long term performance and reliability. This Mikuni HSR carburetor kit is designed to be a bolt-on application, and as such, is set-up and jetted properly for many (more…)
Posted in Buell | No Comments »
Posted by admin on July 30, 2009
Complete Peugeot JetForce workshop manual contain information about: Characteristics, engine, capacities, chassis markings, engine markings, frame, dimension and weight, tyres, service schedule and commissioning, check, change, check and lubricate, test machine, special important points, oil and fuel, starting up after overhauling the engine, tightening torques, body panels, frame, standard,special tools, body panels, frame,standard, instrument cluster, multi function display (more…)
Posted in Manuals Ebook | No Comments »
Posted by admin on June 15, 2009
About the ZX-2R Model I’ve dubbed my Ninja design “ZX-2R,” but that not it’s original meaning. ZX-2R was originally a nickname for the ZXR-250 , which is not sold in the U. S. However, Ninjas of larger displacement follow this naming convention, as is described in more detail on the ZX-2R decal page . Anyway, I like my design well enough to make it the mascot of the FAQ; a presentation of the potential of the EX250 as a motorcycle, not just as an (more…)
Posted in Manuals Ebook | 1 Comment »