Jeep Assist is a dedicated Roadside Assistance program which will provide 24 hour roadside assistance. Jeep Assist may provide emergency accommodation, a replacement vehicle and towing as well as legal, medical and household emergency assistance. Please read this booklet for detailed information on what to do when you require assistance, as well as an explanation of the benefits and conditions provided with this program. (more…)

BreAkDo Wn: Call us anytime, 24hrs per day and help will be on its way. Our breakdown staff will assess the problem and if possible, repair your vehicle there and then. LoCkeD keys in the CAr: so frustrating when it happens! In most cases our staff can gain access to your car, but if necessary will call a locksmith. Lost your keys: We will arrange for your spare key to be couriered to you if you have lost your car keys. (more…)

Welcome to an entirely new direction of Jeep enabled self expression. Not since the patriarch of the Jeep brand first opened the doors of the deepest woods has a Jeep vehicle been designed to deliver its drivers into a whole new territory. This is Compass and it has been born from a marriage of legendary capabilities (more…)

GENERAL INFORMATION Body Style Two-door sport-utility vehicle Assembly Plant Toledo, Ohio EPA Vehicle Class Multipurpose vehicle WRANGLER 4WD JOB RATINGS Base Curb Max Max. GAWR Weight, Tongue Trailer Axle GVWR GCWR Front/Rear est.(a) Weight Weight Engine Transmission Ratio (lbs.) (lbs.) (lbs.) (lbs.) (lbs.) (lbs.) 2.4L Six-speed manual 3.73 4450 6250 2200/2650 3200 100 1000 4.0L Six-speed manual 3.07 (more…)

Testing Engine Systems Jeep has used four basic engine control systems since 1984: • Chrysler —the Chrysler Jeep/Truck Engine Controller (JTEC) system is used on 1996 and later Jeep vehicles, and the Chrysler Single-board Engine Controller Generation II (SBEC-II) is used on 1991-95 Jeep vehicles. These systems provide access to diagnostic trouble codes (DTCs) and serial data. • Renix —All 1986-90 fuel-injected engines use Renix engine control systems. These vehicles provide data (more…)

Identifying a Vehicle Many vehicles have an automatic vehicle identification (ID) function. For others, the vehicle must be manually identified by entering specific vehicle identification number (VIN) characters into the scan tool. 9.1.1 Manual Identification The vehicle ID must be entered manually to test the control system on 1990 and earlier vehicles and may be entered manually for systems that are (more…)

General Installation Practices 1. For ease of installation of your Banks system, familiarize yourself with the procedure by reading the entire manual before starting work. 2. The exploded view (Figure 1). provides only general guidance. Refer to each step and section diagram in this manual for proper instruction. 3. Throughout this manual, the left side of the vehicle refers to the driver’s side, and the right side (more…)

1. For ease of installation of your Banks TorqueTubes, familiarize yourself with the procedure by reading the entire manual before starting work. This instruction manual contains 8 pages of text, illustrations and parts listing. 2. Throughout this manual, the left side of the vehicle refers to the driver’s side, and the right side to the passenger’s side. 3. Disconnect the ground cable from the battery before beginning work. If there are two batteries, disconnect both. 4. Route (more…)

Installation Manual Hard-Arm™ Suspension: Upgrade kit 1984 – 2001 Jeep Cherokee Last Revision No.: 3/1/07 www.claytonoffroad.com 2 WARNING: Suspension systems and their components are designed to enhance your vehicles offroad performance. This may cause your vehicle to handle differently then it did from the factory. These systems and any components should be installed by certified technicians. Attempts to install these products without proper knowledge can lead (more…)

Please gather the following tools before you begin the installation: * Power Drill * 3/16″ or indexed #11 drill bits * Fine permanent marker or felt tip pen * Tape Measure or ruler * Masking Tape * Hammer & center punch * Rivet gun, capable of 3/16″ rivets (most brands can handle this size) Note: Only use the rivets supplied in the QuickLIFT system. Recommended: Craftsman standard or Swivel Riveter (shown – 974749) – $9.99 to $17.99 Remove all items from the packing tube. (more…)