EXCELLENT. THE ONE TRUCK THAT INVITES YOU TO PACK UP AND GET OUT IS THE SAME ONE THAT DISTANCES YOU FROM THE USUAL CROWD. HOW? WITH HEAD-TURNING STYLE THAT STANDS OUT ON THE STREET — OR THE OFF-ROAD. WITH ENGINEERING INNOVATIONS THAT LET IT SIP A VARIETY OF FUELS WITHOUT EVER LETTING UP. DAKOTA. DELIVERING REFINEMENTS AND BEST- IN-CLASS (more…)

THE NEW DODGE NITRO. GET YOUR BOOST TODAY. Here’s something to get your heart racing and your palms sweating: The all new Dodge Nitro. With a broad-shouldered stance and chiselled looks, this mid-size SUV was built for people who live life to the fullest. Under the hood, you can find the latest in our diesel technology – the 2.8 Common Rail Diesel (CRD). (more…)

POISED TO POUNCE WITH PRECISION, ITS ATHLETIC STANCE RADIATES A FULL- ON PURPOSE FROM ANY ANGLE. WITH FOOTWORK THAT PUTS POWER TO THE GROUND WITHOUT WASTING A SINGLE STRIDE, IT WAS BUILT TO BREAK FREE. ONE LOOK AT ITS BROAD SHOULDERS AND YOU KNOW THAT THIS ONE WILL SHRUG OFF ANY CHALLENGE THAT’S THROWN ITS WAY. THIS IS THE 2008 (more…)

APPLICATION DISCLAIMER Caliper Clearance Caliper Clearance Caliper Clearance Caliper Clearance Caliper Clearance Most 17″ wheels will clear the outer diameter of the caliper for a 328mm or 332mm rotor kit. For a 355mm kit, a minimum 18″ wheel is typically required, and for a 380mm rotor kit, a minimum 19″ wheel is needed. The more critical clearance, however, is the gap between the spokes of the (more…)

BEFORE drilling, make sure to check for wires or other items that may be damaged during rilling. Step 1: Prep the vehicle a) Remove the rear seat from vehicle. b) Remove factory seatbelt buckles and detach factory seatbelt anchors. Retain OEM mounting hardware, and this will be required later in the installation process. retain factory seatbelt buckles for vehicle resale. c) Remove any items from the trunk that may (more…)

UNIqUE AppEARANcE The 17″ alloy wheels complement the Dodge Nitro’s unique appearance and allow for optimum ride and handling. FUll lENGTH cENTRE cONSOlE The centre console incorporates a storage bin providing 8 litres of storage in the lower section and an additional 2 litres of storage in the removable upper tray. The lower bin can accommodate up to 13 CD’s (more…)

WARNING Read and understand all instructions, warnings, cautions, and notes in this sheet and in your owners manual before you begin the installation of this shift lever extension. NOTE This procedure is for Dodge vehicles with a manual transmission. Your application may very in appearance but the steps are all applicable. 1 A. Start manual trans. shift lever removal. 1. Remove the upper shift boot. (more…)

MODULE-INTEGRATED POWER DESCRIPTION The Integrated Power Module (IPM) is a combination of the Power Distribution Center (PDC) (1) and the Front Control Module (FCM) (2). The IPM is located in the engine compartment, next to the battery. The power distribution center mates directly with the (FCM) to form the IPM. The (PDC) is a printed circuit board based module that contains fuses and relays, while the FCM contains the electronics controlling the IPM and other (more…)

INSTALLATION PROCEDURES: This mount kit is designed as a weld-in application. Cutting, grinding, and welding is required. These mounts can be used when replacing both a stock 6 cylinder or 4 cylinder engine. To install a Dodge V8 into a Jeep TJ, we recommend that the entire front clip of the vehicle be removed for ease of installation. This would also include the hood, grille, both fenders, and miscellaneous components. Some of the components in the engine compartment may (more…)

Data Link Connection 2. The Data Link connector is located in different locations based on the year of the truck: • 98.5-99 the triangle shaped connector is located on the drivers side of the engine in the wiring harness near the power steering pump • 2000-2001 the three prong flat connector is located on top of the fuel lift pump that is located on the driver’s side of the engine directly below the MAP sensor, note: on some 2001 truck’s the connector is located on the drivers side of the (more…)