CANMAX400DEI-TOYOTA2 Wiring Diagram Sold wires in the factory remote as shown. Remove cover and battery from factory remote. Make solder and connections as shown. 1 2 10 20 Push To Start … … output(+/-) Dome light supervision Auto light shutdown Auto light shutdown(+) Brake Input At relay (pin 86) Ground Grey Brown Yellow Grey/Black Green/Black Pink/White Violet/Brown Violet Auto light(at light switch) Cut Dome light wire(+) Ignition sense Unlock Lock Once the vehicle is started, the module will automatically shut off the engine

CANMAX400DEI-TOYOTA2 Wiring Diagram Sold wires in the factory remote as shown. Remove cover and battery from factory remote. Make solder and connections as shown. 1 2 10 20 Push To Start output (+/-) Dome light supervision Auto light shutdown Auto light shutdown (+) Brake Input At relay (pin 86) Ground Grey Brown Yellow Grey/Black Green/Black Pink/White Violet/Brown Violet Auto light (at light switch) Cut Dome light wire (+) Ignition sense Unlock Lock Once the vehicle is started, the module will automatically shut off the engine once the (-) While running (status) wire is removed. This can be bypassed by pressing the UNLOCK button on the aftermarket remote once the engine is running, that will allow 45 seconds to the driver to enter in the vehicle and press on the brake pedal without having the engine shut off. 20 pin connector wire side view When the engine is running, the factory remote will not work so the door lock option is required. Directed Electronics inc. is not responsible for damages caused by soldering done in the original remote control. Brake pedal +12v 6 amp Brake trigger CANMAX400DEI supports multiple data bus architectures including: CAN High speed, CAN Single Wire, CAN Fault Tolerant, GM-LAN, J1850, ISO, BEAN, FLEXRAY and more. CANMAX400DEI includes 2 additional ports: XKEY and XPANSION. The second generation XKLOADER2 is required for flashing CANMAX400DEI.

Download LEXUS 2009-2010 TOYOTA VENZA 2009-2010.Pdf