100 Watt inverter circuit using minimum number of components.I think it is
quite difficult to make a decent one like this with further less components.Here we use
CD 4047 IC from Texas Instruments for generating the 100 Hz pulses and four 2N3055
transistors for driving the load. The IC1 Cd4047 wired as an a stable multivibrator produces two 180 degree out of phase
100 Hz pulse trains.These pulse trains are are preamplifes by the two TIP122
transistors.The out puts of the TIP 122 transistors are amplified by four 2N 3055
transistors (two transistors for each half cycle) to drive the inverter transformer.The 220V AC will be available at the secondary of the transformer.Nothing complex just the
elementary inverter principle and the circuit works great for small loads like a few bulbs
or fans.If you need just a low cost inverter in the region of 100 W, then this is the best….

Download 100 Watt inverter circuits.Pdf